Figure 4-31 Gmu 11 Overbraid Termination - Garmin GI 275 Installation Manual

Part 23 aml stc

Hide thumbs Also See for GI 275:

Table of Contents

[1] Install #10 grounding hardware in accordance with AC 43.13-1B Section 11-189. If there is an

existing hole located in an appropriate area it may be utilized for the grounding hardware. If there

is no existing hole usable for this purpose, then drill and de-burr a 0.196-0.206 inch hole.

[2] MS25036-103 terminal lug (or equivalent).

[3] Terminal lug face or connecting hardware must not interfere with bend radius of rib edge or

stiffened holes. Stud hole must be located a minimum of 1 inch from unstiffened holes. Refer to

SAE AS25036 for lug dimensions.

[4] The exposed cable not having overbraid in the wingtip areas must be 6 inches or less.

190-02246-10

Figure 4-31 GMU 11 Overbraid Termination

GI 275 Part 23 AML STC Installation Manual

Table of Contents