Table 5-28 Sperry Spz-200A/500 Autopilot Configuration; Table 5-29 S-Tec 20/30/40/50/60-1 Autopilot Configuration - Garmin GI 275 Installation Manual

5.4.9.7 Sperry

Table 5-28 Sperry SPZ-200A/500 Autopilot Configuration

Autopilot Interface
Sperry
SPZ-200A/
SPZ-200A/
500
500
5.4.9.8 S-TEC
If the autopilot has been previously configured to operate with the NSD 360, the HSI Type must be set to
NSD 360 DC and not King KI 525. If the autopilot is configured to operate with any other heading system,
it must be configured to either NSD 360 or KI 525 (KCS-55) in order to be compatible with the GI 275.

Table 5-29 S-TEC 20/30/40/50/60-1 Autopilot Configuration

Autopilot Interface
S-TEC
S-TEC 20/30/
20/30/40/50/
40/50/60-1
60-1
Notes:
[1] Set the HSI Type to NSD 360 DC if the autopilot was previously configured with a
NSD-360. Set the HSI Type to King KI 525 if the autopilot was previously configured with a KI 525.
190-02246-10
Rev. 11
Ports/Config - Settings
HSI Type Sperry RD-550
Sperry
SPZ-200A/
Flight
500
Director
Button
GPSS
Discrete
Gyro
Emulation
ILS/GPS
Discrete Out Lo
Approach
Ports/Config - Settings
HSI Type [1]
Button
GPSS
Discrete
ILS/GPS
Discrete Out Lo
Approach
GPS Select Discrete Out Lo
GI 275 Part 23 AML STC Installation Manual
FD Discrete
Enabled
Other GI 275
Scaler to HDG
GPSS Discrete
Scaler to HDG
None
NSD 360 DC
King KI 525
Scaler to HDG
GPSS Discrete
Scaler to HDG
Value/Port Numbers
1.0
Discrete In 1 Thru 6
1.0
4 Thru 9
Value/Port Numbers
1.0
Discrete In 1 Thru 6
1.0
4 Thru 9
4 Thru 9
Page 5-26