Table 5-4 Ahrs Configuration Priority - Garmin GI 275 Installation Manual

Config
Order
1 1st external sensor
2 2nd external sensor
Internal ADAHRS from
3
GI 275 Primary ADI
Internal ADAHRS from
4
GI 275 Standby ADI
Internal ADAHRS from
5
GI 275 HSI
Notes:
[1] If an internal sensor is configured, it must be set as that unit's default sensor. Refer to
Section 5.5.4 for instructions and example configurations.
190-02246-10
Rev. 11

Table 5-4 AHRS Configuration Priority

Source
GSU 75
GRS 77
GRS 79
GX00 TXi
GSU 75
GRS 77
GRS 79
GX00 TXi
Internal [1]
Other GI 275
Internal [1]
Other GI 275
Internal [1]
Other GI 275
Interface
Configure as Internal if configuring
that unit's internal sensor. Otherwise,
configure as Other GI 275.
Configure as Internal if configuring
that unit's internal sensor. Otherwise,
configure as Other GI 275.
Configure as Internal if configuring
that unit's internal sensor. Otherwise,
configure as Other GI 275.
GI 275 Part 23 AML STC Installation Manual
Notes
Page 5-14