Table 5-57 Original Gauge Settings; Table 5-58 Additional Gauge Settings - Garmin GI 275 Installation Manual

If replacing an existing gauge, all markings will need be replicated on the EIS display. Use Table 5-57 to
gather the marking and range information for each gauge specified in the AFM/POH or other approved
data.
If configuring a new EIS gauge, only configure the Units and the Gauge Range. All units must match the
AFM/POH, if applicable, and values selected must be appropriate for the gauge function.
Attribute
Gauge Type
Units
Arc(s)
Minimum Line
(minimum safe operating limit)
Maximum Line
(maximum safe operating limit)
Line/Radial(s)
Gauge Range
Other Markings
Include the settings in Table 5-58 for the specific gauge. If the markings in Table 5-58 conflict with AFM/
POH or other approved data, use the AFM/POH or other approved data.
Carb Temp
Fuel Quantity
190-02246-10
Rev. 11

Table 5-57 Original Gauge Settings

Color:
Min:
Max:
Color
Min:
Max:
Color:
Min:
Max:
Color:
Min:
Max:
Minimum (lowest value on gauge):
Maximum (highest value on gauge):

Table 5-58 Additional Gauge Settings

Gauge
Data
Marking
Blue range from -15°C to 5°C
Red line at 0 (usable fuel)
GI 275 Part 23 AML STC Installation Manual
Page 5-64