Table 5-39 Stormscope Configuration Settings; Table 5-40 Pfd Sync Configuration Settings; Table 5-41 General Purpose Discrete In Settings; Table 5-42 General Purpose Discrete Out Settings - Garmin GI 275 Installation Manual

5.4.15 Stormscope

Configure the Stormscope interface per the settings in Table 5-39.
Stormscope Interface
WX-500 WX-500
Wired to other
Other GI 275
GI 275

5.4.16 PFD Sync

Configure PFD Sync as HSDB if interfaced to a G500/G600 TXi system via HSDB. PFD Sync allows the
TXi GDUs and GI 275 displays to sync the heading bug, course bug, and baro correction.
Interface
HSDB

5.4.17 General Purpose Discrete In

Configure the General Purpose Discrete In ports and speeds per the settings in Table 5-41.
General Purpose Discrete In
Discrete In

5.4.18 General Purpose Discrete Out

Configure the General Purpose Discrete Out ports and speeds per the settings in Table 5-42.
General Purpose Discrete Out
Discrete Out
190-02246-10
Rev. 11

Table 5-39 Stormscope Configuration Settings

Ports/Config - Settings

Table 5-40 PFD Sync Configuration Settings

Ports/Config - Settings
GDUs Installed

Table 5-41 General Purpose Discrete In Settings

Ports/Config - Settings
Audio Inhibit
Display Backup

Table 5-42 General Purpose Discrete Out Settings

Ports/Config - Settings
On Ground
Terrain Aud Actv
RS-232 RX
Port Numbers
Discrete In Lo
Discrete In Lo
Port Numbers
Discrete Out Lo
GI 275 Part 23 AML STC Installation Manual
Port Numbers
1 Thru 3
Port Numbers
1 Thru 6
5 Thru 6
1 Thru 9
Page 5-32