Garmin GI 275 Installation Manual page 226

5.5.3.4 EIS Page Options
• Gauges Main page — Displays required EIS gauges (Main EIS page in Normal mode).
• Gauges AUX page — Displays additional EIS gauges (AUX EIS page in Normal mode).
• CHT/EGT page — Displays a graph depicting cylinder head temperature and exhaust gas
temperature for each cylinder.
• Fuel page — Displays additional fuel data.
• Summary page — Displays supplementary EIS data, such as flight/engine timers and max
temperatures.
5.5.3.5 MFD/Standby ADI Page Options
The MFD/Standby ADI contains configurable pages from 1 - 18. To configure a page as a certain function,
touch the Page ( ) button and select the desired function from the list. The GI 275 will automatically
populate the maximum number of pages based on the interfaced equipment. To limit the number of
displayed pages in Normal mode, configure unwanted pages to None.
NOTE
When configured as a MFD/Standby ADI, the ADI page will be the configured as Page 1.
CAUTION
If the GI 275 is configured as a standby for a system that is not approved for MFD pages
per Table 3-12, ensure that all MFD pages are configured off.
• ADI page [3] — Displays pitch, roll, slip/skip, airspeed tape, altitude tape, and optional heading.
• CDI page — Displays lateral and vertical deviations.
• Standard HSI page — Provides magnetically stabilized primary heading.
• Enhanced HSI page — Provides map underlay capable of displaying ownship on a moving map
with traffic and weather overlays.
• Traffic page [1] — Provides depiction of traffic (ADS-B, TIS-A, TCAS).
• SXM Weather page [1] — Provides depiction of SXM weather (with valid subscription).
• FIS-B Weather page [1] — Provides depiction of FIS-B weather.
• Stormscope page [1] — Provides depiction of lightning strikes.
• Terrain page — Provides depiction of terrain.
• Map page — Displays moving map with ownship icon.
• Gauges Main page [2] [4] — Displays required EIS gauges (Main EIS page in Normal mode).
• Gauges AUX page [2] [4] — Displays additional EIS gauges (AUX EIS page in Normal mode).
• CHT/EGT page [2] [4] — Displays a graph depicting cylinder head temperature and exhaust gas
temperature for each cylinder.
• Fuel page [2] [4] — Displays additional fuel data.
• Summary page [2] — Displays supplementary EIS data, such as flight/engine timers and max
temperatures.
• MFD Data page [2] — Displays configurable navigation information. Requires interface to
external navigator to populate information.
• Radio Altimeter page [1] — Displays altitude above terrain.
• Transponder page [1] [5] — Provides control and display of GTX 345 transponders.
Notes:
[1] Page only available when the GI 275 is interfaced to an applicable LRU.
190-02246-10
Rev. 11
GI 275 Part 23 AML STC Installation Manual
Page 5-48