Table 5-17 Cessna Ac Autopilot Configuration; Table 5-18 Cessna Dc Autopilot Configuration (1000 - Garmin GI 275 Installation Manual

5.4.9.4 Cessna
Select Cessna AC or Cessna DC based upon whether the autopilot is strapped for AC or DC course/
heading error inputs.
The NAV 1/NAV 2 lighted switch legend must be obliterated from view so that any NAV source indication
on the autopilot mode controller is hidden from view.
Autopilot Interface
Cessna
300 IFCS
400 IFCS Cessna AC
400B
800 IFCS
Table 5-18 Cessna DC Autopilot Configuration (1000 IFCS)
Autopilot Interface
Cessna
Cessna DC
1000 IFCS
Notes:
[1] Configure Gyro Emulation with the following considerations:
• For 1000A Series Computer Amplifier P/Ns 46210-0001, -0002, and -0102 (i.e., for
installations that previously utilized a panel mount gyro, such as a G-895B, G-1050A, G-550A,
or G-519B), select Cessna/ARC G519.
• For 1000A Series Computer Amplifier P/Ns 46210-0004, -0005, and -0105 (i.e., installations
that previously utilized a remote mount gyro, such as a VG-14(A)), select Sperry VG-14A.
190-02246-10
Rev. 11

Table 5-17 Cessna AC Autopilot Configuration

Ports/Config - Settings
HSI Type
GPSS
ILS/GPS
Approach
Ports/Config - Settings
HSI Type
Flight
Director
GPSS
Gyro
Emulation [1]
ILS/GPS
Approach
Cessna G-502A/B
Button Scaler to HDG
GPSS Discrete
Discrete
Scaler to HDG
Discrete Out Lo
Cessna G-504A
Cessna FD Discrete
1000 IFCS Enabled
Other GI 275
Button Scaler to HDG
GPSS Discrete
Discrete
Scaler to HDG
Cessna/ARC G519
Sperry VG-14A
Discrete Out Lo
GI 275 Part 23 AML STC Installation Manual
Value/Port Numbers
1.0
Discrete In 1 Thru 6
1.0
4 Thru 9
Value/Port Numbers
1.0
Discrete In 1 Thru 6
1.0
4 Thru 9
Page 5-21