Importing/Exporting Seam Patterns - Dürkopp Adler 513 Operating Instructions Manual

60
Information
This setting allows the user to select the
the selection with the
7. Press the
8. Press the
4.9

Importing/exporting seam patterns

The user can import seam patterns (bearing numbers 101 through
200) to the control panel of the machine using a USB key. The
USB key can also be used to export seam patterns (bearing
numbers 101 to 200) that are stored on the control panel.
Requirements:
• use the Pattern Design software (which can be ordered
from Dürkopp Adler under material number 0513 590024)
to create a seam pattern in .VDT format
• Description with XXX.VDT (XXX must be a number
between 101 and 200)
• Seam pattern must be saved in a folder under the name
DH_PAT (on the top directory level of the USB key)
To import/export a seam pattern:
1. Switch on the machine.
2. Press the
 The system menu appears:
button.
button to save the setting.
button to exit the saving process.
button.
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
icon and confirm