Importing/Exporting Programs - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

142
6.7.8.1 Setting the Sewing stop parameters
You can set additional parameters for the Sewing stop. Possible
settings and the corresponding value ranges are listed in the table.
Icon Menu item
Needle up position
Thread trimmer
(can only be set in the last
segment)
Sewing foot lift at
segment end
Height of sewing
foot lift after
trim/at segment end

6.8 Importing/exporting programs

Programs cannot be imported or exported by the Default User.
This process requires that the user be logged in as a technician,
 Service Instructions.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Setting option
Value range
On/Off
Value range
On/Off
Value range
On/Off
Value range
00 to 13 [mm]
(depending on subclass)