Setting The Seam Begin/Segment Begin Parameters - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Icon Parameter
Seam begin bartack parameters
Bartack at seam begin
Number of stitches backwards
Number of stitches forward
Number of bartack sections
A bartack consists of several sections. If
the sewing direction is changed, a new
section is started. The number of sections
in a bartack can be set here.
Stop-Time for direction change
The waiting time at the turning points
(e.g. for a change of sewing direction) is set
at this point. A short waiting time in
milliseconds should ensure consistent seam
quality (ornamental-stitch bartack).
132
6.7.6 Setting the
ters
There are various options for setting the Seam Begin/Segment
Begin parameters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Seam Begin/Segment Begin
Settings
Value range
On/Off
Value range
01 to 50
Value range
01 to 50
Value range
01 to 99
Value range
0000–1000 [ms]
parame-