Connecting Fibre Channel Cables Directly To Host Or Switch - Quantum Scalar i500 Getting Started Manual

Connecting Fibre Channel
Cables Directly to Host or
Switch
For each tape drive:
1 Connect one end of a Fibre Channel cable to the Fibre Channel port on the tape drive.
0
2 Connect the other end of the cable to your host or switch.
Fibre Channel
port
Step 5: Connect the Tape Drive Cables
Scalar i500 Getting Started Guide
Document No. 6-01741-02
October 2008
Fibre
Channel
cable to
host or
switch
13