Removing The Internal Packing Materials; Opening The Doors; Removing The Load And Bulk Packs - Quantum P1000 Series Unpacking Instructions Manual

Automated tape library

Hide thumbs Also See for P1000 Series:

Table of Contents

ATL P1000 Series Library Unpacking Instructions

Document 6221100-02, Ver. 2, Rel. 0

March 1999

Removing the Load

and Bulk Packs

Removing the Internal Packing

Materials

This section explains how to remove the internal packing materials

that protect the library during shipping and installation.

Caution: Before removing the internal packing materials, verify that

the library is at its final installation site. Moving the library

without these materials in place may damage the library.

Caution: Take precautions to prevent electrostatic discharge

whenever you remove the library enclosure or open the

library doors.

To open the library doors:

Procedure

Locate the key in the accessories kit and unlock the front door of

the library.

Open the left door first, then open the right door.

To remove the load and bulk packs (see figure 19):

Procedure

Grip the load pack handles and squeeze them together.

This releases the latches securing the load pack.

Still holding the load pack handles, pull the load pack forward and

out of the library.

Repeat steps 1 and 2 to remove the bulk pack.

Removing the Internal Packing Materials

Table of Contents