Camera And Sound; Controlling The Camera; Pan And Tilt - Polycom ViewStation H.323 User Manual

Camera and Sound

Controlling the Camera

You cannot disconnect the main camera, but you can select a primary camera (such
Note
as a document camera) as the camera that will be used each time you power-on the
ViewStation H.323. To select the primary camera, go to System Info>Admin
Setup>Video/Camera and select the primary camera.

Pan and Tilt

© Polycom, Inc.
You can adjust the pan, tilt, and zoom of near and far site cameras. You can
also enable the camera to track voices automatically or track to presets.
To select the camera to control, use the remote control to:
• Move your near-site camera. Press the NEAR button on the remote.
A camera icon
right corner of the main monitor.
• Move the main far-site camera during a call. Press the FAR button on
the remote.
A camera icon
right corner of the main monitor.
• Select another local camera. Press NEAR twice to display icons for all
of the connected local cameras. Then use the arrow buttons to highlight
the appropriate icon. Some icons appear regardless of the connection
or availability of cameras. Refer to your QuickStart booklet to verify
the connection of auxiliary devices before attempting to use them.
To adjust the pan or tilt of a camera, use the arrow buttons on the remote.
The camera will pan, tilt, or zoom only when the Camera icon appears
onscreen.
• To pan left, press the left arrow button.
• To pan right, press the right arrow button.
• To tilt up, press the up arrow button.
31
facing toward the near-site is displayed at the top
facing toward the far-site is displayed at the top
ViewStation H.323 User's Guide
4