Check Point UTM-1 Edge User Manual page 385

Table 66: Web Rules Fields
In this field... Do this...
Block/Allow Type the URL or IP address to which the rule should apply.
access to the
Wildcards (*) are supported. For example, to block all URLs that start with
following URL
"http://www.casino-", set this field's value to:
*
Note: If you block a Web site based on its domain name
(http://<domain_name>), the Web site is not automatically blocked when
surfing to the Web server's IP address (http://<IP_address>). Likewise, if
you block a Web site based on its IP address, the Web site is not
automatically blocked when surfing to the domain name. To prevent access
to both the domain name and the IP address, you must block both.
Log allowed Select this option to log the specified blocked or allowed connections.
connections /
By default, allowed Web pages are not logged, and blocked Web pages are
Log blocked
logged.
connections
If the connection Select the source of the connections you want to allow/block.
source is
To specify an IP address, select Specified IP and type the desired IP address
in the field provided.
To specify an IP address range, select Specified Range and type the desired IP
address range in the fields provided.
Chapter 12: Setting Your Security Policy
http://www.casino-
Using Web Rules
371