Check Point UTM-1 Edge User Manual page 130

Using Internet Setup
Configuring a Direct ADSL Connection
In the Port drop-down list, select ADSL.
1.
2. Do one of the following:
•
To automatically fill in the supported ADSL settings for your ISP, do the
following:
1) Click Search by country and ISP.
The ADSL Configuration Assistant opens.
2) In the Country drop-down list, select your country.
3) In the ISP / Telco drop-down list, select your ISP or telephone
company.
The ADSL Configuration Assistant closes. The Connection Type drop-down
list and the ADSL Link Settings fields are filled in with the correct values for
your ISP.
•
To manually fill in the supported ADSL settings for your ISP, in the
Connection Type drop-down list, select the Internet connection type you
intend to use.
The display changes according to the selected connection type.
For PPPoA, continue at Using a PPPoA Connection on page 117.
For EoA, continue at Using an EoA Connection on page 119.
For PPPoE, continue at Using a PPPoE Connection on page 121.
For information on configuring bridged connections, see Adding Internet
Connections to Bridges on page 237.
116 Check Point UTM-1 Edge User Guide