Check Point UTM-1 Edge User Manual page 472

Web Filtering
Configuring Web Filtering Advanced Settings
Note: If the UTM-1 appliance is remotely managed, contact your Service Center
administrator to change these settings.
To configure Web Filtering advanced settings
Click Services in the main menu, and click the Web Filtering tab.
1.
The Web Filtering page appears.
Next to the Bypass scanning if Service Center is unavailable option, specify
2.
how the gateway should handle Web Filtering when the service is enabled and
the Service Center is unavailable, by doing do one of the following:
•
To temporarily block all connections to the Internet, click
This ensures that users will not gain access to undesirable Web sites, even when
the Service Center is unavailable.
The button changes to
•
To temporarily allow all connections to the Internet, click
This ensures continuous access to the Internet.
The button changes to
When the Service Center is available again, the gateway will enforce the configured
Web Filtering policy.
458
.
.
.
.
Check Point UTM-1 Edge User Guide