Check Point UTM-1 Edge User Manual page 215

The Step 2: Network Service Name dialog box appears.
5. Type a name for the network service object in the field.
Click Finish.
6.
Table 36: Network Service Fields
In this field...
Protocol
Protocol Number
Port Ranges
Chapter 6: Managing Your Network
Do this...
Select the network service's IP protocol.
If you select Other, the Protocol Number field appears. If you select TCP
or UDP, the Port Ranges field appears.
Type the number of the network service's IP protocol.
Type the network service's port or port ranges.
Multiple ports or port ranges must be separated by commas. For
example: "1000-1003,2000-2001,2005".
Configuring Network Service Objects
201