Check Point UTM-1 Edge User Manual page 150

Using Internet Setup
Configuring No Connection
In the Port drop-down list, select None.
1.
The fields disappear.
Click Apply.
2.
Table 28: Internet Setup Fields
In this field...
ADSL Link Settings
DSL Standard
VPI Number
VCI Number
Encapsulation
Type
PPP Settings
Username
Password
Confirm password
136
Do this...
Select the standard to support for the DSL line, as specified by your ISP.
Type the VPI number to use for the ATM virtual path, as specified by
your ISP.
Type the VCI number to use for the ATM virtual circuit, as specified by
your ISP.
Select the encapsulation type to use for the DSL line, as specified by
your ISP.
Type your user name.
Type your password.
Type your password.
Check Point UTM-1 Edge User Guide