Check Point UTM-1 Edge User Manual page 263

Table 45: High Availability Page Fields
In this field...
Priority
My Priority
Internet Connection
Tracking
Internet - Primary
Internet - Secondary
Port Tracking
LAN1-4
or LAN1-8
Chapter 8: Configuring High Availability
Do this...
Type the gateway's priority.
This must be an integer between 1 and 255.
Type the amount to reduce the gateway's priority if the primary Internet
connection goes down.
This must be an integer between 0 and 255.
Type the amount to reduce the gateway's priority if the secondary
Internet connection goes down.
This must be an integer between 0 and 255.
Note: This value is only relevant if you configured a backup connection.
For information on configuring a backup connection, see Configuring
a Backup Internet Connection on page 155.
Type the amount to reduce the gateway's priority if the LAN port's
Ethernet link is lost.
This must be an integer between 0 and 255.
Configuring High Availability on a Gateway
249