Check Point UTM-1 Edge User Manual page 118

Using the Internet Wizard
Click Next.
3.
The system attempts to connect to the Internet via the specified connection.
The Connecting... screen appears.
At the end of the connection process the Connected screen appears.
Click Finish.
4.
Table 24: PPTP Connection Fields
In this field...
Username
Password
Confirm password
Service
Server IP
Internal IP
Subnet Mask
Using a Cable Modem Connection
No further settings are required for a cable modem connection. The Confirmation screen
appears.
Click Next.
1.
The system attempts to connect to the Internet via the specified connection.
The Connecting... screen appears.
At the end of the connection process the Connected screen appears.
Click Finish.
2.
104
Do this...
Type your user name.
Type your password.
Type your password again.
Type your service name.
Type the IP address of the PPTP modem.
Type the local IP address required for accessing the PPTP modem.
Select the subnet mask of the PPTP modem.
Check Point UTM-1 Edge User Guide