Check Point UTM-1 Edge User Manual page 275

Note: Traffic Shaper may not enforce guaranteed rates and relative weights for
incoming traffic as accurately as for outgoing traffic. This is because Traffic Shaper
cannot control the number or type of packets it receives from the Internet; it can
only affect the rate of incoming traffic by dropping received packets. It is therefore
recommended to enable traffic shaping for incoming traffic only if necessary. For
information on enabling Traffic Shaper for incoming and outgoing traffic, see Using
Internet Setup on page 113.
Click Next.
6.
The Step 3 of 3: Save dialog box appears with a summary of the class.
7. Type a name for the class.
For example, if you are creating a class for high priority Web connections, you can
name the class "High Priority Web".
Click Finish.
8.
The new class appears in the Quality of Service Classes page.
Chapter 9: Using Traffic Shaper
Adding and Editing Classes
261