Check Point UTM-1 Edge User Manual page 230

Managing Ports
The Port Setup page appears.
In the Assign to Network drop-down list, do one of the following:
3.
•
To assign a network port to the LAN, select LAN.
•
To configure a network port for use with a WAN Internet connection, select
Internet.
•
To disable a network port, select None.
•
To disable the Serial port, select Disabled.
Click Apply.
4.
A warning message appears.
Click OK.
5.
The port is reassigned to the specified network or purpose.
216 Check Point UTM-1 Edge User Guide