Check Point UTM-1 Edge User Manual page 71

The Local Area Connection Properties window opens.
Check if Internet Protocol Version 4 (TCP/IPv4) appears in the list box and if it
6.
is properly configured with the Ethernet card installed on your computer.
TCP/IP Settings
In the Local Area Connection Properties window, double-click the Internet
1.
Protocol Version 4 (TCP/IPv4) component, or select it and click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties window appears.
Click the Obtain an IP address automatically radio button.
2.
Chapter 3: Installing and Setting Up UTM-1
Before You Install the UTM-1 Appliance
57