Check Point UTM-1 Edge User Manual page 608

Configuring HTTPS
Table 121: Access Options
Select this
option...
Internal Networks
Internal Networks +
VPN
Internal Networks +
IP Range
ANY
Disabled
594
To allow access from...
The internal network only.
This disables remote access capability. This is the default.
The internal network and your VPN.
A particular range of IP addresses.
Additional fields appear, in which you can enter the desired IP address
range.
Any IP address.
Nowhere.
This disables both local and remote access capability.
This option is relevant to the SNMP protocol only.
Check Point UTM-1 Edge User Guide