Check Point UTM-1 Edge User Manual page 192

Configuring Network Settings
To configure the OfficeMode network
Click Network in the main menu, and click the My Network tab.
1.
The My Network page appears.
In the OfficeMode network's row, click Edit.
2.
The Edit Network Settings page appears.
In the Mode drop-down list, select Enabled.
3.
The fields are enabled.
In the IP Address field, type the IP address to use as the OfficeMode network's
4.
default gateway.
Note: The OfficeMode network must not overlap other networks.
In the Subnet Mask text box, type the OfficeMode internal network range.
5.
If desired, enable or disable Hide NAT.
6.
See Enabling/Disabling Hide NAT on page 163.
7. If desired, configure DHCP options.
See Configuring DHCP Server Options on page 169.
Click Apply.
8.
A warning message appears.
Click OK.
9.
A success message appears.
178 Check Point UTM-1 Edge User Guide