Check Point UTM-1 Edge User Manual page 164

Setting Up Dialup Modems
The USB Devices page appears. If the UTM-1 appliance detected the modem, the
modem is listed on the page.
If the modem is not listed, check that you connected the modem correctly, then click
Refresh to refresh the page.
Next to the modem, click Edit.
4.
The USB Modem Setup page appears.
5. Complete the fields using the information in USB Dialup Fields on page 151.
Click Apply.
6.
To check that that the values you entered are correct, click Test.
7.
The page displays a message indicating whether the test succeeded.
8. Configure a Dialup Internet connection on the USB port.
See Using Internet Setup on page 113.
150 Check Point UTM-1 Edge User Guide