Check Point UTM-1 Edge User Manual page 301

In this field... Do this...
Security Select the security protocol to use. For information on the supported
security protocols, see Wireless Security Protocols on page 270.
If you select WEP encryption, the WEP Keys area opens.
If you select WPA-Enterprise, the Require WPA2 (802.11i) and WPA Encryption
fields appear.
If you select WPA-Personal, the Passphrase, Require WPA2 (802.11i), and WPA
Encryption fields appear.
Note: When configuring a WDS link, only None and WEP are not supported.
Type the passphrase for accessing the network, or click Random to randomly
Passphrase
generate a passphrase.
This must be between 8 and 63 characters. It can contain spaces and
special characters, and is case-sensitive.
For the highest security, choose a long passphrase that is hard to guess, or
use the Random button.
Note: The wireless stations must be configured with this passphrase as well.
Require WPA2 Specify whether you want to require wireless stations to connect using
(802.11i) WPA2, by selecting one of the following:
•
•
Chapter 10: Working with Wireless Networks
Enabled. Only wireless stations using WPA2 can access the
wireless network.
Disabled. Wireless stations using either WPA or WPA2 can
access the wireless network. This is the default.
Configuring Wireless Networks
287