To configure WAN load balancing
1.
Configure the desired load balancing weight for both the primary and
secondary Internet connections.
For further information, see the Load Balancing Weight field in Using Internet Setup
on page 113.
Click Network in the main menu, and click the Internet tab.
2.
The Internet page appears.
In the WAN Load Balancing area, drag the load balancing lever to On.
3.
WAN load balancing is enabled. Traffic will be distributed automatically across the
defined Internet connections, according to the configured load balancing weights.
Note: You can view the effect of WAN load balancing in the Traffic Monitor.
Chapter 5: Configuring the Internet Connection
Configuring WAN Load Balancing
157
Need help?
Do you have a question about the UTM-1 Edge and is the answer not in the manual?