Check Point UTM-1 Edge User Manual page 487

To create a Site-to-Site VPN with two VPN sites
1. On the first VPN site's UTM-1 appliance, do the following:
a. Define the second VPN site as a Site-to-Site VPN Gateway, using the
procedure Adding and Editing VPN Sites on page Error! Bookmark
not defined..
b. Enable a Remote Access VPN Server using the procedure Setting Up
Your UTM-1 Appliance as a VPN Server on page 476.
2. On the second VPN site's UTM-1 appliance, do the following:
a. Define the first VPN site as a Site-to-Site VPN Gateway, using the
procedure Adding and Editing VPN Sites on page Error! Bookmark
not defined..
b. Enable a Remote Access VPN Server using the procedure Setting Up
Your UTM-1 Appliance as a VPN Server on page 476.
Note: You can manually configure each VPN site's internal encryption domain via
the CLI. For information, refer to the Embedded NGX CLI Reference Guide.
Chapter 16: Working with VPNs
Overview
473