Web Filtering - Check Point UTM-1 Edge User Manual

Web Filtering

Click Next.
4.
The Done screen appears with a success message.
Click Finish.
5.
The following things happen:
•
You are disconnected from the Service Center.
•
The services to which you were subscribed are no longer available on your
UTM-1 appliance.

Web Filtering

When the Web Filtering service is enabled, access to Web content is restricted according to
the categories specified under Allow Categories. If a user attempts to access a blocked page,
the Access Denied page appears. For information on customizing this page, see
Customizing the Access Denied Page on page 373.
If desired, you can permit specific users to override Web Filtering. Such users will be able
to view Web pages without restriction, after they have provided their username password
via the Access Denied page. For information on granting Web Filtering override
permissions, see Adding and Editing Users on page 546.
In addition, you can choose to exclude specific network objects from Web Filtering
enforcement. Users connecting from these network objects will be able to view Web pages
without restriction, regardless of whether they have Web Filtering override permissions.
For information on configuring network objects, see Using Network Objects on page 188.
Note: The Web Filtering service is only available if you are connected to a Service
Center and subscribed to this service.
454 Check Point UTM-1 Edge User Guide