Table of Contents
Advertisement
The DSCP Classification page displays.
The following table describes the items in the previous figure.
Item
CoS
DSCP DP0
DSCP DP1
DSCP DP2
DSCP DP3
Save
Reset
4.3.4.11
Ingress Map
This function shows a table of QoS Ingress Maps which is made up of individual map
entries. Each entry has a key and an action. The key indicates which fields of the
frame will be mapped to the fields specified by and according to the action. Each Map
can hold a number of map rules, or mappings between possible keys and actions.
Which of those rules will be applied depends on the selection of (Key-Type, Action-
Type). Each row describes a user-defined map.
Maps contain multiple rules. The page allows you to view and configure the key and
action filters that will be used when searching through the rules.
1.
Navigate to Configuration > QoS and click Ingress Map.
The QoS Ingress Map Configuration page displays.
The following table describes the items in the previous figure.
Item
Map ID
EKI-8500 Series User Manual
Figure 4.25 DSCP Classification
Description
Displays the identifier for the class of service entry.
Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 0.
Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 1.
Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 2.
Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 3.
Click Save to save changes.
Click Reset to undo any changes made locally and revert to
previously saved values.
Figure 4.26 QoS Ingress Map Configuration
Description
Displays the map ID for the entry. Click the ID to edit the Ingress map.
53
Advertisement
Table of Contents
