Figure 4.28 Qos Control List Configuration - Advantech EKI-8500 Series User Manual

Item
Key-Type
QoS Egress Map
Modification Buttons
Refresh
Remove All
4.3.4.13 QoS Control List
This function shows the QoS Control List (QCL) consisting of the QCEs. Each row
describes a defined QCE. The maximum number of QCEs is 256 on each switch.
Click on the lowest plus sign to add a new QCE to the list.
1. Navigate to Configuration > QoS and click QoS Control List.
The QoS Control List Configuration page displays.
The following table describes the items in the previous figure.
Item
QCE
Port
DMAC
SMAC
Tag Type
EKI-8500 Series User Manual
Description
Indicates the Key Type that will be used to filter the map rules when
applying the map. As mentioned above, map rules can have various
keys and this is to make a select set of them. Possible Key types are:
CoS ID: Use classified COS ID as key. Table width: 1
CoS ID - DPL: Use classified COS ID and DPL as key. Table width: 4
DSCP: Use classified DSCP as key. Table width: 8
DSCP - DPL: Use classified DSCP and DPL as key. Table width: 32
It is possible to modify each map (or add new maps) in the table using
the following buttons:
 Edit: Edits the map.
Delete: Deletes the map.

 Add: Adds a new map in the table.
Click Refresh to refresh the page.
Click Remove All to remove all Ingress Maps (and their
corresponding rules).

Figure 4.28 QoS Control List Configuration

Description
Indicates the QCE ID.
Indicates the list of ports configured with the QCE or Any.
Indicates the destination MAC address. Possible values are:
 Any (default): Match any DMAC
 Unicast: Match unicast DMAC
Multicast: Match multicast DMAC

 Broadcast: Match broadcast DMAC
 <MAC>: Match specific DMAC
Match specific source MAC address or Any.
Indicates tag type. Possible values are:
Any (default): Match tagged and untagged frames.

Untagged: Match untagged frames.

 Tagged: Match tagged frames.
C-Tagged: Match C-tagged frames.

S-Tagged: Match S-tagged frames.

55