Figure 4.33 Tas Configuration Parameters - Advantech EKI-8500 Series User Manual

The following table describes the items in the Frame Preemption Configuration page.
Item
Port
Frame Preemption
TX
Start without LLDP
Verify Disable TX
Preemptable Queues Click to select the parameter to a preemptive status for the priority. If
Save
Reset
Cancel
4.3.5.3 TAS
4.3.5.3.1 Ports
This function allows the user to inspect the current TAS configurations, and possibly
change them as well.
1. Navigate to Configuration > TSN > TAS and click Ports.
The TAS Configuration Parameters page displays.
EKI-8500 Series User Manual
Description
Displays the logical port for the settings contained in the same row.
Please note that Frame Preemption is not supported on ports with
maximum speed 25 Gigabit/sec and is also not supported on 10G
Gigabit/sec Aquantia Copper port.
Click to enable or disable (default) the value of the 802.3br
aMACMergeEnableTx parameter for the port. This value determines
whether frame preemption is enabled (TRUE) or disabled (FALSE) in
the MAC Merge sublayer in the transmit direction.
Click to enable or disable (default) when this field is checked, Frame
Preemption will be active when Frame Preemption TX is checked.
Click to enable or disable (default) the value of the 802.3br
aMACMergeVerifyDisableTx parameter for the port. This value
determines whether the verify function is disabled (TRUE) or enabled
(FALSE) in the MAC Merge sublayer in the transmit direction.
checked, it takes value preemptable if frames queued for the priority
are to be transmitted using the preemptable service for the Port. If not
checked, it takes value express if frames queued for the priority are to
be transmitted using the express service for the Port and preemption
is enabled for the Port.
Click Save to save changes.
Click Reset to undo any changes made locally and revert to
previously saved values.
Click Cancel to return to the previous menu without saving any
updates.

Figure 4.33 TAS Configuration Parameters

59