Figure 4.6 Configuring Ip Routes - Advantech EKI-8500 Series User Manual

To add an IP interface:
Item Description
Delete Click to select the deletion of existing IP interface(s).
VLAN Enter a value to identify the VLAN associated with the IP interface.
Only ports within the identified VLAN can access the IP interface.
Only available when creating a new interface.
DHCPv4
Enabled Click to enable the interface. If enabled, configure the client ID type
(IfMac,ASCII, or HEX) IPv4 address and mask length of the interface
for the DHCP protocol.
Type Click the drop-down menu to specify the client identifier. Options:



IfMac Click the drop-down menu to specify the DHCP client identifier by
using the MAC address in the DHCP option 61 field.
ASCII Enter a string to specify the DHCP client identifier by using the ASCII
type string in the DHCP option 61 field.
HEX Enter a string to specify the DHCP client identifier by using the HEX
type string in the DHCP option 61 field.
Hostname Enter a string to identify the DHCP client hostname.
Fallback Enter a value to define the time out threshold in seconds (0 to
4294967295 seconds) when trying to obtain a DHCP lease. Once
threshold is reached, the configured IPv4 address is used as the IPv4
interface address. A value of zero disables the function.
Current Lease An active lease is identified by the DHCP interface's current interface
address, as provided by the DHCP server.
IPv4 Address If DHCP is not enabled, enter the IPv4 address to designate the
interface.
IPv4 Mask If DHCP is not enabled, enter the IPv4 network mask in bits (0 & 30
bits for an IPv4 address). If enabled, the fallback address network
mask is used.
DHCPv6
Enable Click to enable the interface. If enabled, configure the client ID type
(IfMac,ASCII, or HEX) IPv6 address and mask length of the interface.
Rapid Commit Click to enable or disable (default) the rapid-commit option. If this
option is enabled, the DHCPv6 client terminates the waiting process
as soon as a Reply message with a Rapid Commit option is received.
Current Lease Displays the current lease of the interface address.
IPv6
Address Enter a string to identify IPv6 address of the interface. The field may
be left blank if IPv6 operation on the interface is not desired.
Mask Length Enter a string to identify the length of a network address must match
for qualification in the route (values: 0 to 32 bits respectively 128 for
IPv6 routes).
Add Interface Click to add a new IP interface entry.
To add an IP route:
IfMac
ASCII
HEX

Figure 4.6 Configuring IP Routes

34 EKI-8500 Series User Manual