Table of Contents
Advertisement
5.
Secure the wall mount plates with M3 screws, see the following figure.
Once the wall mounting plates are secure on the device, you will need to attach the
wall screws (x6).
6.
Locate the installation site and place the switch against the wall, making sure it
is the final installation location.
7.
Use the wall mount plates as a guide to mark the locations of the screw holes.
8.
Drill four holes over the four marked locations on the wall, keeping in mind that
the holes must accommodate wall sinks in addition to the screws.
9.
Insert the wall sinks into the walls.
EKI-8500 Series User Manual
Figure 2.4 Installing Wall Mount Plates
13
Advertisement
Table of Contents
