Table of Contents
Advertisement
The DSCP Translation page displays.
The following table describes the items in the previous figure.
Item
DSCP
Trust
CoS
DPL
Save
Reset
4.3.4.10
DSCP Classification
This function allows you to configure the mapping of CoS and DPL to DSCP value.
1.
Navigate to Configuration > QoS and click DSCP Classification.
Figure 4.24 DSCP Translation
Description
Displays the maximum number of supported DSCP values (range: 0
to 63).
Click to enable or disable (default) trust for the DSCP entry.
Click the drop-down menu to select the precedence level (values: 0 to
3).
Click the drop-down menu to select the CoS value (values: 0 to 7).
Click Save to save changes.
Click Reset to undo any changes made locally and revert to
previously saved values.
52
EKI-8500 Series User Manual
Advertisement
Table of Contents
