Figure 4.65 Upload Configuration; Figure 4.66 Activate Configuration; Figure 4.67 Delete Configuration File - Advantech EKI-8500 Series User Manual

5. Click Upload Configuration to start the upload.
If the flash file system is full (i.e. contains default-config and 32 other files, usually
including startup-config), it is not possible to create new files. Instead an existing file
must be overwritten or another file must be deleted.
4.5.4.4 Activate Configuration
The function allows you select a configuration file to activate.
Navigate to Maintenance > Configuration and click Activate.
1.
The Activate Configuration page displays.
2. Click a file from the File Name table to select and activate.
3. Click Activate Configuration to start the process.
4.5.4.5 Delete Configuration File
The function allows you select a configuration file to delete.
1. Navigate to Maintenance > Configuration and click Delete.
The Delete Configuration File page displays.
2. Click a file from the File Name table to select and delete.
3. Click Delete Configuration file to start the process.

Figure 4.65 Upload Configuration

Figure 4.66 Activate Configuration

Figure 4.67 Delete Configuration File

84 EKI-8500 Series User Manual