Table of Contents
Advertisement
4-26
Checking the Battery Level of a Remote Modem
To check the battery level of a remote modem:
1. Touch the tab in the Modem Config screen for the modem whose battery
level is to be checked.
2. On the tab, touch Get Battery.
An information window temporarily
opens indicating that the deck box
is acquiring the battery level. When
the battery level is acquired, the
value is displayed in the window as
shown in Figure 4-34. In addition,
the battery voltage is displayed on
the tab. If the battery level is not
acquired, a no response indication
is displayed in an alert window.
Acquiring and Displaying
Ranges in the Modem
Config Screen
To acquire and display ranges in the
Modem Config screen:
1. Touch the tab in the Modem Config
screen for the modem to range on.
2. Touch Range Options to open the
Range Options pop-up if it is not
already open as shown in
Figure 4-35.
3. Touch Get Range.
The range command is sent and an information window temporarily
opens confirming the sent command along with the SMART release or
modem address. When the range is acquired, it is displayed in another
temporary information window in units of meters or feet as shown in
Figure 4-35, along with the round trip time in milliseconds. Refer to
User's Manual
TELEDYNE BENTHOS
Figure 4-34 Information Window
with Displayed Battery Level
Figure 4-35 Displayed Ranges in
the Modem Config Screen
P/N M-270-10, Rev. B
Advertisement
Table of Contents
