Teledyne BENTHOS UDB-9000 User Manual page 83

UDB-9000 Universal Deck Box - UDB-9000-M (Portable) and UDB-9000-MR (Rack Mount) Configurations
6. Release Send.
The command is sent and the Transpond Data screen opens. With this
screen open—and after the command has been transmitted and any
acknowledgements received—ranges can be acquired and displayed by
touching Transpond (Ping). In addition, touching Repeat before touching
Transpond (Ping) enables continuous ranging on a released transponder
for tracking purposes. Refer to "Acquiring and Displaying Ranges" on
page 4-37 for detailed instructions, including how to use filtering to block
the display of ranges for replies of specific frequencies.
NOTE Refer to the URI users manual for the specific response
confirmation. Receipt of any ping is indicated by plots of frequency versus
range in the thumbnail graph of the Transpond Data screen along with the
display of the frequency, the ranges and the round trip times. The displayed
ranges and round trip times should be disregarded, however, and if the
frequency has been blocked, no plots or displayed information will be
present. Furthermore, as the frequency of each ping is the same and the
round trip time increases for each ping, the plots in the graph will line up
vertically.
4
Operation using the Touch Screen Display Sending Commands To Acoustic Releases
4-45