Table of Contents
Advertisement
4-8
check will appear in the box. To turn the headphones back on, touch the
box again.
3. Touch the check mark to close the Phones Vol pop-up and save the
volume or mute setting.
Adjusting the Speaker Volume
The speaker volume can be adjusted or the speaker muted. To mute the
speaker, touch the Speaker control. Touch it again to turn the speaker back
on. When muted, the Speaker control displays an X across it.
To adjust the speaker volume:
1. Touch and hold the Speaker
control on the Status and Control
bar.
The Speaker Vol pop-up opens as
shown in Figure 4-10.
2. Touch and drag the slider up or
down to adjust the volume, or
touch anywhere in the slide to
move the slider to that location.
The speaker can also be muted by
touching the Mute check box.
When muted, a check will appear
in the box. To turn the speaker back on, touch the box again.
3. Touch the check mark to close the Speaker Vol pop-up and save the
volume or mute setting.
Setting the Time and Date
The time and the date can be set, and the time can be displayed in 12-hour
or 24-hour time.
To set the time and date:
1. Touch and hold the Time and Date display.
The Set Time/Date pop-up opens as shown in Figure 4-11.
2. Select 24 hr. Time if it is desired to display 24-hour time.
3. Select Show Seconds if it is desired to display seconds.
User's Manual
TELEDYNE BENTHOS
Figure 4-10 Speaker Vol Pop-Up
P/N M-270-10, Rev. B
Advertisement
Table of Contents
