Table of Contents
Advertisement
4-2
Touch Screen Display Overview
The touch screen display includes ten function buttons which provide access
to five main screens and to save and help functions. Seven of the buttons are
active. The buttons are located along the left and right edges of the touch
screen display, five on each side as shown in Figure 4-1. They are always
visible, but depending on the operating state of the UDB-9000, they are at
times disabled. The touch screen display also includes a Status and Control
bar which is shown in Figure 4-5 on page 4-5. It is located at the top of every
screen and, like the function buttons, is always visible
Main Screens
Any one of the five main screens can be accessed at most any time by
touching its corresponding function button. Altogether the screens provide
access to all of the operational features and displays of the UDB-9000. They
are shown in Figure 4-2 and are described below.
User's Manual
Release/Range. Opens the Release/Range screen where
acoustic release commands can be sent and ranges to
transponders and releases can be acquired. This screen also
allows the selection of the UDB-9000 transpond parameter
settings, which comprises the transmit frequency, the transmit
and receive pulse widths, the turn around time, the timeout, and
the detect threshold. In addition, from this screen a Compact
Modem wakeup signal can be sent to activate the Teledyne
Benthos compact acoustic telemetry modems.
Transpond Data. Opens the Transpond Data screen where the
received transponder reply frequencies, ranges and the round
trip travel times are displayed for each transmitted ping. From
this screen filters can be applied to block the display of ranges
for specific reply frequencies, or the ranges for all the received
replies can be blocked from being displayed, or no blocking can
be applied to display all the ranges. In addition, the display of
the range for only the first received reply of a selected receive
frequency can be picked. A thumbnail graph that plots each of
the received reply frequencies in kilohertz versus the range in
kilometers is also provided on this screen, as is access to the
same transponder parameter settings as the Release/Range
screen.
TELEDYNE BENTHOS
P/N M-270-10, Rev. B
Advertisement
Table of Contents
