Udb-9000-M And Udb-9000-Mr Universal; Deck Boxes; Transducer; Transducer Cable - Teledyne BENTHOS UDB-9000 User Manual

UDB-9000 Universal Deck Box - UDB-9000-M (Portable) and UDB-9000-MR (Rack Mount) Configurations

UDB-9000-M and UDB-9000-MR Universal

Deck Boxes

The portable (UDB-9000-M) Universal Deck Box is contained in an impact
resistant case with a splashproof front panel. The front panel includes a touch
screen display, operator controls, connectors for making all the external
connections, a speaker, and two vent plugs. This manual is also included
behind the foam cushioning inside the case cover.
The rack mount (UDB-9000-MR) Universal Deck Box easily mounts to a
standard 19-inch rack using standard 19-inch rack front panel mounting
hardware. The 6U high front panel requires 10.5 in. (26.7 cm) of height in the
rack, and a minimum of 10 in. (25.4 cm) of depth is required for electronics
and cabling. The front panel includes a touch screen display, operator
controls and a speaker. All the connections to the deck box are made using
connectors that are located on the rear panel.
Each deck box, portable or rack mount, is configured to operate with the
selected transducer.

Transducer

The UDB-9000 includes one of four available transducers:
LF/Release Band: Low frequency transducer that operates in the
MF:
HF:
Band C:

Transducer Cable

The transducer cable is available in any one of the following lengths:
25 m (82 ft)
50 m (164 ft)
75 m (246 ft)
100 m (328 ft)
200 m (656 ft)
1
Overview
7–16 kHz frequency band. Standard with a UDB-9000.
Medium frequency transducer that operates in the
16–21 kHz frequency band.
High frequency transducer that operates in the
25–30 kHz frequency band.
Medium-high frequency transducer that operates in
the 22–27 kHz frequency band.
1-3
General Description