Table of Contents
Advertisement
9.
Install the access panel (Install the access panel on page 32).
10. Slide or install the server into the rack.
11. If removed, reconnect all power cables.
12. Power up the server.
13. Configure the server for HPE Persistent Memory.
For more information, see Configuring the server for HPE Persistent Memory on page 58.
Configuring the server for HPE Persistent Memory
After installing HPE Persistent Memory modules, configure the server for HPE Persistent Memory.
IMPORTANT: Always follow recommendations from your software application provider for high-availability best
practices to ensure maximum uptime and data protection.
A number of configuration tools are available, including:
UEFI System Utilities—Access System Utilities through the Remote Console to configure the server by pressing the F9
•
key during POST.
•
iLO RESTful API—Use the iLO RESTful API through tools such as the RESTful Interface Tool (ilorest) or other third-
party tools.
•
HPE Persistent Memory Management Utility—The HPE Persistent Memory Management Utility is a desktop
application used to configure the server for HPE Persistent Memory, as well as evaluate and monitor the server
memory configuration layout.
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (http://
www.hpe.com/info/persistentmemory-docs).
Installing a high-performance fan
This kit is available to meet some extended ambient operating temperatures above 35 degrees Celsius. For more
information about the qualifications for extended ambient configurations, see the Hewlett Packard Enterprise website.
The high-performance fans are used for 8-SFF and 10 SFF drive configurations. They are also required for the 10 SFF
SAS/SATA/NVMe Combo backplane option and for ASHRAE compliant configurations. For more information on ASHRAE
compliant configurations, see the Hewlett Packard Enterprise website.
58
Hardware options installation
Advertisement
Table of Contents
