Table of Contents
Advertisement
•
Intelligent Provisioning—For single-server deployment, updating, and provisioning capabilities. For more information,
see Installing the operating system with Intelligent Provisioning on page 46.
•
Insight Control server provisioning—For multiserver remote OS deployment, use Insight Control server provisioning
for an automated solution. For more information, see the Insight Control documentation on the Hewlett Packard
Enterprise website.
For additional system software and firmware updates, download the Service Pack for ProLiant from the Hewlett Packard
Enterprise website. Software and firmware must be updated before using the server for the first time, unless any
installed software or components require an older version.
For more information, see Keeping the system current on page 160.
For more information on using these installation methods, see the Hewlett Packard Enterprise website.
Installing the operating system with Intelligent Provisioning
Procedure
1. Connect the Ethernet cable between the network connector on the server and a network jack.
2. Press the Power On/Standby button.
3. During server POST, press F10.
4. Complete the initial Preferences and Registration portion of Intelligent Provisioning.
5. At the 1 Start screen, click Configure and Install.
6. To finish the installation, follow the onscreen prompts. An Internet connection is required to update the firmware and
systems software.
Selecting boot options in UEFI Boot Mode
On servers operating in UEFI Boot Mode, the boot controller and boot order are set automatically.
Procedure
1. Press the Power On/Standby button.
2. During the initial boot:
To modify the server configuration ROM default settings, press the F9 key in the ProLiant POST screen to enter
•
the UEFI System Utilities screen. By default, the System Utilities menus are in the English language.
If you do not need to modify the server configuration and are ready to install the system software, press the F10
•
key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the Hewlett Packard Enterprise
website.
Selecting boot options
This server supports both Legacy BIOS Boot Mode and UEFI Boot Mode. On servers operating in UEFI Boot Mode, the
boot controller and boot order are set automatically.
46
Setup
Advertisement
Table of Contents
