Table of Contents
Advertisement
Procedure
1. Press the Power On/Standby button.
2. Do one of the following:
To enter the UEFI System Utilities screen and modify the server configuration ROM default settings, press the F9
•
key on the ProLiant POST screen. Choose one of the following boot modes:
◦
Legacy BIOS
◦
UEFI (default)
If you do not need to modify the server configuration and are ready to install the system software, press the F10
•
key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the Hewlett Packard Enterprise
website.
Registering the server
To experience quicker service and more efficient support, register the product at the Hewlett Packard Enterprise
Product Registration website.
Setup
47
Advertisement
Table of Contents
