Table of Contents
Advertisement
3.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4.
Do one of the following:
a. Extend the server from the rack (Extend the server from the rack on page 31).
b. Remove the server from the rack (Remove the server from the rack on page 32).
5.
Remove the access panel (Remove the access panel on page 32).
6.
Remove the primary PCI riser cage (Remove the primary PCI riser cage on page 34).
7.
If needed, remove any expansion boards installed in the riser cage.
8.
Remove the existing riser board from the PCI riser cage.
9.
Install the optional riser board in the riser cage.
10. Install the following, as needed:
84
Hardware options installation
Advertisement
Table of Contents
