Replay Menu; Markers Menu; Setup Menu - Tektronix SPECMON3 Manual

Reference
Continuous Acquisition Mode
Menu bar: Run > Continuous
Selecting Continuous places the analyzer in the Continuous acquisition mode. In Continuous mode, the
analyzer acquires and displays acquisitions repeatedly. The Continuous and Single Sequence acquisition
modes are mutually exclusive.
Selecting Continuous restarts acquisitions.

Replay Menu

The Replay Menu (see page 357)
or a recalled TIQ file. You can use this to compute new results for old data after you change settings
or measurements.

Markers Menu

The Markers menu provides to settings that define and control the location of markers.
Setting
Peak (see page 337)
Next Peak >
Marker to Center Frequency
Define Markers (see page 337)
xxx

Setup Menu

The Setup menu provides access to control panels that specify parameters for numerous signal analyzer
functions.
SPECMON3 & SPECMON6 Printable Help
allows you to rerun measurements using the data in acquisition memory
Description
Moves the selected marker to the highest peak on the trace.
Moves the selected marker to next peak depending on the setting chosen.
Sets center frequency to the frequency of the selected marker.
Displays the Define Marker control panel.
Continuous Acquisition Mode
401