Tektronix SPECMON3 Manual page 189

RF Measurements
Setting
Expand
Reset layout
Load
Save
xxx
To specify the ranges and limits for the Spurious measurement:
Edit the values in the Ranges and Limits table.
You can edit the Ranges and Limits table in two ways:
Edit values directly from the Ranges and Limits tab. You will need to scroll the table to access all
settings.
Click the Expand button. This displays the Ranges and Limits Table in a new window that can be
sized to the fullscreen.
The following table describes the parameters that are set in the Ranges and Limits Table.
SPECMON3 & SPECMON6 Printable Help
Description
Displays the Ranges and Limits Table in a new, resizeable window.
You can reorder columns in the Ranges and Limits Table by dragging the columns to a
new position. Clicking Reset Layout returns the column order to the factory default order.
Click to load a saved Ranges and Limits table from a file.
Click to save the current Ranges and Limits table to a file.
Ranges and Limits Tab
177