Table of Contents Preface ......................Clear and sanitize procedures ..................Memory devices ....................Data export devices.................... Troubleshooting..................... How to sanitize or clear a nonfunctional instrument............TLA700/TLA7000 Series Declassification and Security Instructions...
Page 4
Table of Contents TLA700/TLA7000 Series Declassification and Security Instructions...
These instructions tell how to do the following: Clear or sanitize the memory devices Clear or sanitize an instrument that is not functioning Products The following Tektronix products are covered by this document: TLA7AA1, TLA7AA2, TLA7AA3, TLA7AA4 TLA7AB2, TLA7AB4 TLA7AC2, TLA7AC3, TLA7AC4...
Page 6
Preface Related documents Refer to the following service documents available on the Tektronix Web site at www.tektronix.com/manuals or to the TLA Documentation CD that is available with your product: TLA700 Series Mainframe Installation Manual TLA7000 Series Mainframe Installation Manual Tektronix Logic Analyzer Module (TLA7AAx, TLA7ABx & TLA7NAx) Service...
Clear and sanitize procedures Memory devices The following tables list the volatile and nonvolatile memory devices. Table 1: Volatile memory devices Type and User Data input minimum size Function modifiable method Location To clear To sanitize DRAM, Firmware Written LPU board Remove power source Remove power source 1 M X 8...
Page 8
Clear and sanitize procedures Table 2: Nonvolatile memory devices Type and User Data input minimum size Function modifiable method Location To clear To sanitize FLASH, Stores instrument Programmed LPU board Not applicable, does Not applicable, does 2 M X 8 firmware at the not contain user data...
Backplane To locate and remove the module from the TLA mainframe, refer to the TLA7000 Series Mainframe Installation Manual or to the TLA700 Series Mainframe Installation Manual on the Tektronix Web site at www.tektronix.com/manuals or on the TLA Documentation CD.
Page 10
Clear and sanitize procedures TLA700/TLA7000 Series Declassification and Security Instructions...
Troubleshooting How to sanitize or clear a nonfunctional instrument If your instrument is not functioning, remove the power source from the instrument for at least 20 seconds. TLA700/TLA7000 Series Declassification and Security Instructions...