Tektronix SPECMON3 Manual page 328

GP Digital Modulation
3. Select the Equalizer tab.
4. Select Enable Equalization so it is checked.
5. Verify that Mode is set to Hold if you have previously trained the Equalizer. If you have not previously
trained the Equalizer,
Advanced Params Tab
The Advanced Params tab specifies additional parameters that control the demodulation of the signal.
Advanced Params tab for all modulation types except nFSK and C4FM
Advanced Params tab for modulation type nFSK
Advanced Params tab for modulation type C4FM
316
train the Equalizer (see page 315)
Advanced Params Tab
and then set the Mode to Hold.
SPECMON3 & SPECMON6 Printable Help